DL JCPT-HD/DC Series, Training Manual, Page: 46 / 119

培训手册
Training Manual
操作
Operation
JCPT-HD/DC
www.cndingli.com
4-10
1.6
刹车释放（
Brake Release
）

JCPT0808HD~JCPT1612HD
1)
用楔子垫住车轮，以防止机器滚动。（
Chock the wheels to prevent the machine from
rolling.
）
2)
必须确保绞盘索已正确固定到驱动底盘的系牢点上，并且通道上没有障碍物。（
Be sure the
winch line is properly secured to the drive chassis tie points and the path is clear of all
obstructions.
）
3)
推进黑色的刹车释放旋钮以打开刹车阀。（
Push in the black brake release knob to open the
brake valve.
）
4)
连续推拉红色刹车释放泵按钮直至刹车释放。（
Pump the red brake release pump knob until
brake released.
）
不推荐牵引液压驱动的机器，如果确实需要进行牵引，保证机器在收拢状态，牵引速度不能超过
3.5 km/h
。（
Towing the Hydraulic Drive Model is not recommended. If the machine must
be towed, do not exceed 3.5 km/h.
）

JCPT0808DC~JCPT1612DC
1)
用楔子垫住车轮，以防止机器滚动。（
Chock the wheels to prevent the machine from
rolling.
）
2)
将地面和平台控制器上的红色
“
紧急停机
”
按钮均拉出到
“
开
”
位置。（
Pull out the red Emergency
Stop button on both the ground and platform controls to the on position.
）
3)
向下拨动平台下降按钮，同时将钥匙开关转向地面控制侧以释放刹车。（
Press and hold lift
switch to “down” position in ground control, meanwhile turn on the key switch to the "Ground"
position. The brake will be released after Alarm alerts.
）
刹车释放旋钮
Brake release
switch
刹车释放泵
Brake release