Chapter 3
Page 78
Using the System
Scan for Device Codes
If the code for your device is not listed in the Device Codes tables starting on
page 101, use this procedure to scan the remote control’s memory for the
device code.
6. If you want to program
Limited Mode, press
1
. If not,
skip to step 7.
See
Limited Mode
for more
information.
7. Press the
POUND
(
#
) button.
If you entered the code correctly, the
mode button flashes three times.
8. Press the blank
POWER
button to turn off the device. If
the device does not turn off,
go to step 10.
If the code works, the device should
turn off.
9. Turn the device back on and
try some other appropriate
buttons to make sure they
work. If the code works for
other buttons, stop here.
Sometimes the blank
POWER
button works when other buttons
don’t.
10. If the code doesn’t work,
repeat steps 3 through 9 with
another device code from the
Device Code tables.
Try every code listed for your brand
until one works for your device.
11. If you are unable to find a
code that works, try
Scan for
Device Codes
(below).
1. Turn the device on.
Use the device’s front panel buttons
or its remote control.
2. Press and hold the mode
button until all the other mode
buttons light up, and then
release the button.
The mode button flashes.
For example, hold the
TV
mode
button for a TV until all of the other
mode buttons light. When you let
go, the
TV
mode light flashes.
3.
For
AUX
mode only
:
•
Press
0
for a second TV.
•
Press
1
for a second VCR
or DVD player.
•
Press
2
for a tuner or
amplifier.
This step is for programming which
kind of device that should be
programmed in
AUX
mode. If
you’re not programming in
AUX
mode, skip to step 4.
4.
For
AUX
mode only
: Press the
STAR (*)
button.
5. Press the blank
POWER
button.
This puts your remote in the scan
mode.
Summary of Contents for Dish 322
Page 40: ...Chapter 2 Page 36 Receiver Description and Installation Notes...
Page 104: ...Chapter 4 Page 100 Reference Notes...
Page 127: ...Page 123 Index NOTES...
Page 128: ...Index Page 124 NOTES...
