Dinolift DINO 210XTB II, Operating Instructions Manual

Page: 45 / 67

45
1. When driving on a slope, the tow-bar must always point towards the descent. Never drive
with the driving device with the tow-bar pointing towards the ascent.
2. Place chocks under the wheels before disconnecting the device from the towing vehicle.
3. Always apply the handbrake before disconnecting the lift from the towing vehicle.
4. Only use the handbrake as a parking brake or for emergency stopping.
5. When transferring the lift using the driving device:
• take care not to allow the wheel to roll over your foot
• look out for sudden sideways movements of the tow-bar
• be careful not to cause danger to other people and the environment
6. Do not move the device on a slope using only hand-power. You may lose control over it
and cause an injury.
7. Never park a vehicle combination on a slope.
8. Never leave the lift on a slope being supported only by the self-braking action of the
driving device.
Do not drive downhill with the driving device, if the inclination of the surface is
more than 5 per cent, i.e., more than 1/20 (corresponding to a descent of 0.5 m over
a distance of 10 m). If the gradient of the surface is greater than this, you may lose
control of the device.
5.3.3. Towing the lift
Connecting to the towing vehicle
1. Lift up and push forward (in the driving direction) the handle of the ball-coupling. Now the
ball-coupling is released.
2. Press the ball-coupling onto the towball using only a little force. The connection and
locking take place automatically.
Always make sure, after the connection, that the ball-coupling is properly
locked