Dinolift DINO 210XTB II, Operating Instructions Manual

Page: 47 / 67

47
min. 2000 mm
160 XT II / XTB II: 185 mm
180 XT II / XTB II: 230 mm
210 XT II / XTB II: 250 mm
5.4. LIFTING THE DEVICE
The device can be lifted from the lugs shown in the picture. Lugs are placed symmetrically
on both sides. Lifting lugs are also marked in the machine with instructional labels.
During lifting the platform must be in transport position. Remove all loose material and other
excess load from the platform before lifting.
Use a suitable crane and lifting accessories. Make sure that the crane and other lifting
equipment are strong enough for the weight of the device. Check the weight from the
technical specifications.
Be careful not to damage the device during the lifting!
5.5. LONG-TERM STORAGE
Clean the machine carefully, lubricate it and apply protective grease to it before putting it into
storage for a longer period of time. Repeat the cleaning and lubrication procedures while
resuming the operation.
If you leave the lift standing for a longer period of time, for example over the winter, we
recommend propping it up to release any load from the wheels.
DANGER
WARNING
CAUTION
NOTICE
The periodic inspections must be executed following the steps described in the instructions.