Dinolift DINO 210XTB II, Operating Instructions Manual

Page: 36 / 67

36
Operating instructions
•
DINO 160XTB
•
180XTB
•
210XTB
5. OPERATING INSTRUCTIONS
5.1. START-UP
Before operating the lift, perform all daily maintenance measures listed in the maintenance
schedule.
DANGER
WARNING
CAUTION
NOTICE
The operator must do a worksite inspection and daily maintenance:
• at the beginning of each workday
• before operating the lift at a new worksite
• when the operator changes in the middle of a workday
5.1.1. Worksite inspection
1. General information
• Is the lift suited for the intended job?
• Is the performance of the lift sufficient for the job? (reach, loadability etc.)
• Is the position of the lift safe?
• Is the lighting on the worksite sufficient?
2. Documents
• Are the Operation and Service Instructions for this lift present? (Manufacturer´s
instructions)
• Are inspections and servicing carried out in accordance with the instructions and
have the defects affecting the safety been checked as repaired?
• (Inspection protocols)
3. Structure (Visual inspection and operational test)
• General condition of the lift
• Operation and protection of the controls
• Emergency stop, signal horn and limit switches
• Electrical appliances and wiring
• Oil leaks
• Load markings and signs
4. Operator
• Is the operator old enough?
• Has the operator recieved the required training?
5. Special issues on the worksite
• Are there any additional regulations relevant to the worksite or the work?