Dinolift DINO 210XTB II, Operating Instructions Manual

Page: 40 / 67

40
Operating instructions
•
DINO 160XTB
•
180XTB
•
210XTB
• To operate the movements of the boom system, press first the
rocker switch 17 at the end of the control lever, and after that, move
the control lever carefully in the desired direction of movement of
the boom. The movement speed of the platform can be continually
adjusted. If you move the lever before pressing the rocker switch, the
action is deterred.
• Operate the work platform movements with lever switches 30 and
36.
• Moving the platform via the lever switches 30 and 36 requires that
the dead-man-button 35 be depressed simultaneously.
1 2
3 4
• Stop the engine with stop-button.
For further instructions, see point “Operating controls in platform control centre UCB”
DANGER
WARNING
CAUTION
NOTICE
Do not add load (e.g. another person) onto the platform, while the red overload light
(18) is illuminated. Risk of tipping over!
Measures to be taken after an event of overloading: Retract the platform to inside the
operating range of the RK4 by depressing the “telescope in” button (6 or 21)(the green light
will be illuminated). After this, the lift may be operated normally
7. With the boom slightly lifted and the telescope extended, make sure that the platform
does not lower by itself while the operating controls are not being used.
8. Move the platform to the work object
DANGER
WARNING
CAUTION
NOTICE
The platform, buildings around it and other obstructions may cause a crushing hazard.
Hands and legs must be keps inside the work platform at all times when moving the
platform. Beware of obstacles above the platform.
Start/stop automation
The start/stop automation is operational, when driving from the platform control centre UCB.
The operation is started by depressing the rocker switch at the end of the control lever 17
to start the engine. After that, turn the control lever 17 carefully in the desired direction of
movement of the boom. The engine will stop automatically in about 3 seconds after the
movement of the boom has stopped. The engine will restart as soon as the dead-man-switch
is depressed, and the desired movement of the boom is resumed.
IF THE SAFETY DEVICES OR THE EMERGENCY DESCENT SYSTEM ARE NOT
WORKING, HAVE THEM REPAIRED BEFORE OPERATING THE LIFT.