Dinolift DINO 210XTB II, Operating Instructions Manual

Page: 37 / 67

37
5.1.2. Positioning the lift
1. make sure that the ground is even and hard enough to support the lift in a steady, level
position.
Soil material Density
Max. ground pressure
P kg/cm²
Gravel High density 6
Medium density 4
Loose 2
Sand High density 5
Medium density 3
Loose 1,5
Fine sand High density 4
Medium density 2
Loose 1
Sand / mud High density (very hard to work) 1,00
Medium density (hard to work) 0,50
Loose (easily worked) 0,25
DANGER
WARNING
CAUTION
NOTICE
If the ground is soft, use sufficiently large and sturdy additional plates under the support
outriggers.
2. Drive the lift to the inspected lifting site
3. Engage the parking brake
4. Disconnect the lift from the towing vehicle
P