Dinolift DINO 210XTB II, Operating Instructions Manual

Page: 55 / 67

55
20
Axles and suspension I
21
Driving device C G I
22
Lights C C C I
23
Hydraulic oil C C C D
24
Hydraulic hoses, pipes and fittings C C C I
25
Condition and attachment of battery, electrical devices and
wiring
C C I
26
Hydraulic pressure I
27
Condition of safety limit switches C
28
Operation of safety limit switches C C C I
29
Operation of overload protection device C I D
30
Load holding and load regulation valves C C
31
Platform levelling system C C C
32
Platform control devices C I
33
Emergency descend, emergency stop and
sound signal
C C C C
34
Signs, labels and machine plates C C C C
35
Instruction manuals C C C C
36
Test loading I
37
Corrosion protection C D
38
Movement speed adjustment D
39
Special inspection D
Maintenance item A B C D E
Always lubricate the lift and apply a protective grease film immediately after the washing.
Special inspection is required if the lift has been damaged in a manner which may affect
its load-bearing capacity or safe operation. For further instructions, see the maintenance
instuctions manual.
DANGER
WARNING
CAUTION
NOTICE
If the platform has a combustion engine power pack, check the engine manual for
information on maintenance prochedures required by the engine.
DANGER
WARNING
CAUTION
NOTICE
If the lift is operated under demanding conditions (in exceptionally humid or dusty
environment, corrosive climate, etc.), the intervals between the oil changes and the other
inspections shall be shortened to meet the prevailing conditions in order to maintain the
operational safety and reliability of the lift.