Dino lift DINO 180 T, Operation Instructions Manual, Page: 49 / 92

DINO 180T-1
49
10. Inspect safety device functions, operating from chassis control panel.
- Lift the platform slightly off transport position.
- the outriggers must not function in any position of
the operating switch
- Lift the arm and check the following
1. Emergency stop
2. Emergency descent, telescope retraction
3. Emergency descent, lowering the boom
- Lower the boom into transport position, raise the support outriggers and switch on "driving".
- the boom must not function in any position of the operating switch
- Switch off the "driving" -function, lower the support outriggers and level the lift.
- Load about 80 kg (177 lbs) onto
the platform and extend the boom
until the red warning light lights up
and the platform stops.
Now:
- The lifting -function should be
functional
- Telescope retraction should be
functional.