Dino lift DINO 180 T, Operation Instructions Manual, Page: 34 / 92

DINO 180T-1
34
SERVICE AND MAINTENANCE
GENERAL
- Inspections and service should always be performed as described in this manual.
- More complicated repairs and service measures should be performed by specially trained personnel
(the manufacturer, or manufacturers representative).
- No changes or additions may be made to the lift without written consent from the manufacturer.
- Faults and wear that might influence the operational safety of the unit must be repaired and corrected
immediately.
- Oil must not be let out onto the floor or ground.
- Always keep the lift clean, especially the platform.
- Always clean the lift before service or maintenance work.
- Use original spare parts
- When making repairs platform, boom and outriggers should be supported in a way that prevents
loading of the structure to be repaired or other causes of danger. (e.g. transport position or separate
supporting structures)
- The machine can be lifted with two slings attached to the four lugs (see picture). The loading capacity
of each sling has to be at least 1800 kg.
Be careful when lifting the unit!
310 mm