Dino lift DINO 180 T, Operation Instructions Manual, Page: 22 / 92

DINO 180T-1
22
OPERATING THE UNIT FROM THE WORK PLATFORM
11. Turn the operating switch (1) into position 2 and
take away the key.
The cover of the chassis control panel must not be locked
with key.
- now you can operate the lift from the work platform lever
17.
First push the rocking switch on the control lever end, and
carefully move the lever in the desired direction of
movement.
- test the emergency descent function as follows:
- Lift the boom about 1-2 m (4-7 ft) with
lever 17 and extend the telescope about 1-2
m (4-7 ft). Push the emergency stop -button.
The movement must now come to a halt.
- Start the emergency descent power unit
(pushbutton 20), retract the telescope and
lower the boom (lever 17).
- Lift up the emergency stop -button.
Do not damage the towbar jockey wheel!
The platform movement speed is continually adjusted with the lever 17.
12. Test function of the overload
limit switch RK4.
- Platform load about 80 kg (176 lbs)
- Move the boom to horizontal
position
- Extend the telescope. When the
movement stops the red overload
warning light (18) should light up.
- Compare the actual reach to the
figures in the reach diagrams (page 6)
Front edge of the platform
= reach - 0,5 m (20 in.)