Dino lift DINO 180 T, Operation Instructions Manual, Page: 42 / 92

DINO 180T-1
42
Adjusting the bearings
The wheel bearings are lubricated for life and do not need any service.
(they do not need additional lubrication and they cannot be adjusted).
Service intervals
500 km (300 miles) Running in
5000 km (3000 miles)
Brake adjustment, lubricate the moving parts in the overrun
device.
13 000 - 15 000 km (8 000 - 9 000 miles) or every 6 month:
a) Check brake linings for wear, and renew if necessary.
b) Check the overrun device.
c) Lubricate the sliding parts of the overrun brake.
The high durability and maintenance-free operation of double row angular contact compact bearings
makes the occurrence of bearing breakdowns in extremely rare in normal conditions. If , because of
exceptional operating conditions a bearing failure should occur, it is mandatory to replace the complete
brake drum unit with pressed-in bearings and locking nut..
Warning!
Service work should be done by a trained service repair shop.
The wheels should be turned at least once every 3 months, so that the lubricating film on the bearings
does not crack.