Dino lift DINO 180 T, Operation Instructions Manual, Page: 44 / 92

DINO 180T-1
44
REGULAR SERVICING
The lift should be serviced regularly at 11 - 12 month intervals.
If it is used in corrosive and demanding ambient conditions (Moist, corrosive chemicals etc.), the
technical devices and structure are subjected to harder stresses. In these conditions it is recommended
that the servicing and checks be made at shorter intervals. In corrosive conditions it is also
recommended to use protective chemicals.
Service and maintenance must be performed only by trained personnel well familiar with the
construction and functioning of the lift.
Please refer to your distributors service personnel.
Regular servicing:
1. Always clean the lift thoroughly before starting service and maintenance work.
- Never disassemble hydraulic or electrical equipment without cleaning it first. Dirt and moisture might
cause malfunctions in the equipment, and lead to a deterioration of the operating safety.
- Washing (externally).
Warning!
Do not direct the spray from a high-pressure washer directly at electric parts or connections,
ie. upper and lower control panels, relays, solenoid valves and limit switches.
- Electrical equipment and hydraulic connections should be blown dry with compressed air.
- When the electrical equipment and connections have dried, protect them with moisture repellent
chemicals.
- Piston drivers must protect always after solvent washing with for example CRC3-36 antirust
compound.
Remember cleanliness!