Dino lift DINO 180 T, Operation Instructions Manual, Page: 21 / 92

DINO 180T-1
21
OPERATING THE UNIT FROM THE CHASSIS CONTROL PANEL
10. Turn the operating switch (1) into
position 3
- The boom can be operated using the levers
7, 8 and 9
- Test the emergency descent function as
follows:
1. Lift the boom about 1-2 m (4-
7 ft) (lever 8) and extend the
telescope about 1-2 m (4-7 ft).
Push the emergency stop button.
The movement must now stop.
2. Start the emergency descent
power unit (pushbutton 5),
retract the telescope (lever 9)
and lower the boom (lever 8).
3. Lift up the emergency stop -
push button.
4. Lift up the platform from the tow bar and turn it to the side, so that it can be lowered.
5. Extend the telescope enough to make it possible to enter the platform safely.
Do not damage the tow bar jockey wheel!
Movements are noticeably slower when using the emergency descent function.
When using the chassis control panel the speed of the boom movements cannot be adjusted continually
with the control lever.
Lock the operating switch (1) into position 1 (support outriggers) when you work beneath the boom.
Make sure that there is no person or load in the platform.