Dino lift DINO 180 T, Operation Instructions Manual, Page: 46 / 92

DINO 180T-1
46
4. Inspect the support outrigger joints.
- Lower the outriggers slightly.
- Turn the outriggers back and forth horizontally and check for play in the joints.
- Inspect function and condition of the outrigger limit switch mechanism
- If necessary, renew the joints and pins.
- Lubricate the joints (refer to lubrication plan).
Lower the outriggers into supporting position.
5. Inspect the cylinders, and lubricate the joint bearings (refer to lubrication plan).
- Operating from the lower (chassis) control panel, raise the lift cylinder and inspect the piston rod and
joints.
- Operating from the lower panel, move the lift cylinder into its lowest possible position and inspect the
joints.
- Continue by retracting the telescope cylinder and immediately extending it again. Check the working
condition and tightness of the cylinder.
- Lubricate the lift-, telescope- and stabilizing cylinder joints.
- Inspect and lubricate the outrigger cylinders.