Dino lift DINO 180 T, Operation Instructions Manual, Page: 25 / 92

DINO 180T-1
25
19. When moving the platform, remember the
following
- special care should be taken in the vicinity of high
voltage cables
- do not exceed the max. allowed sideways load
(400N) (88 lbs)
- make sure that no part of the platform or the
operator can come into contact with open-wire cables
- objects may under no circumstances be thrown out
of the platform
- avoid damaging the unit
- when working do not take additional load onto the
platform
- avoid damaging external objects or constructions
- do not overload the platform from working area
20. When the lift is left alone
- move the unit into a safe, steady position, preferably into transport position
- switch off the power unit
- prevent unauthorized use of the unit by locking the main operating panel cover
21. Adjusting the position of the work
platform
The platform angle (horizontal) can be adjusted
from the lower control panel as follows:
- Put the operating switch (1) into position 3
- Choose the direction with the operating lever
(32)
Use the platform positioning control when the
boom is horizontal.
No persons are allowed on the platform when
adjusting.
Use the positioning adjustment when the lift is
supported (outriggers lowered)