E-18
1. Introduction
11. ENTRY LIST
Press to display the Entry List screen.
Pressing and holding CTL and then ENTRY LIST buttons si-
multaneously, enters a signal in the Entry List.
12. HELP
Provides online help.
13. INFO
Displays the "Source Information" or "Projector Information"
window. This button toggles between these two windows.
14. PIXEL
Displays the Position/Clock screen to adjust the clock and
phase.
15. POSITION
Press to display the Position screen; press again to display
the Blanking screen.
16. MUTE PICTURE
Press to turn off the picture for a short period of time. Press
again to restore the picture.
17. MUTE SOUND
This button has no function with the Projector.
18. MUTE OSD
Press to turn off the on-screen display. Press again to restore
the on-screen display.
NOTE: You can also turn off the on-screen display forcibly by pressing and
holding CTL and then pressing MUTE OSD (Forced On-Screen Mute Mode) ;
doing this again restores it. In this case any adjustment will still change the
Projector's memory settings. This mode is available even when input is switched
to another or the power is turned off the main power.
19. AUTO (RGB only)
Press to adjust Position-H/V and Pixel Clock for an optimal
picture.
20. MENU
Press to display the main menu.
While pressing and holding CTL, press this button to display
the Remote Control ID dialog box to specify the remote con-
trol ID. See page E-61.
21. Select (Up/Down/Left/Right)
GH
: Use these buttons to select the menu of the item you
wish to adjust.
FE
: Use these buttons to change the level of a selected menu
item.
A press of the
E
button executes the selection.
Pressing and holding CTL, then pressing
F
button works as a
Back Space key in the entry screen.
Pressing and holding CTL, then pressing this button moves
the menu or dialog box.
22. ENTER
Executes the menu selection and activates items selected from
the menu. When the slider or dialog box is displayed:
Pressing this button confirms adjustments/setting and returns
to the previous menu display.
In seamless switching functions in which an option board has
been mounted, press the ENTER button after the input signal
switching preparation has been completed to finalize the switch-
ing.
See Page E-65 for information about the seamless switching
function.
23. CANCEL
Press to exit the menu.
Press this button with CTL to return to the previous menu with-
out closing adjustment/setting screen while the menus appear.
This feature allows you to adjust or set several items concur-
rently.
24. UNDO
Press to return the adjustments and settings to the previous
condition. While pressing and holding CTL, pressing this but-
ton clears the entire menus or adjustment/setting screen. At
this time the adjustments/settings are stored in memory ex-
cept the items on the setting screen with "OK" and "Cancel"
buttons such as the Menu and the Setup screen.
25. FOCUS (+/–)
While pressing and holding CTL, pressing this button allows
you to adjust the lens focus.
26. MAGNIFY/ZOOM (+/–)
While pressing and holding CTL, pressing this button allows
you to zoom the lens in and out.
27. CTL
Used in conjunction with other buttons, similar to a shift key on
a computer.
28. Infrared Transmitter
Direct the remote control toward the remote sensor on the Pro-
jector cabinet.
29. Remote Jack
Connect your remote cable here for wired operation.
Summary of Contents for HIGHlite 12000Dsx+
