Digital Projection HIGHlite 12000Dsx+, User Manual

Page: 13 / 90

E-13
Control Panel
1. LCD Screen
The liquid crystal display screen shows the condition or the
error message of the Projector.
2. FOCUS (+/-) Button
While pressing and holding CTL Button, pressing this button
allows you to adjust the lens focus.
3. ZOOM (+/-) Button
While pressing and holding CTL Button, pressing this button
allows you to zoom the lens in and out.
4. LENS SHIFT
GHFE
While pressing and holding CTL Button, pressing this button
allows you to adjust the lens offset by shifting the projected
image position horizontally and / or vertically.
5. MENU Button
Displays the menu.
6. SELECT
GHFE
(+) (–)
GH
: Use these buttons to select the menu of the item you
wish to adjust.
FE
: Use these buttons to change the level of a selected menu
item. A press of the
E
button executes the selection.
7. ENTER Button
Executes your menu selection and activates items selected
from the menu.
8. CANCEL Button
Press this button to exit "Menus". Press this button to return
the adjustments to the last condition while you are in the ad-
justment or setting menu.
1. Introduction
9. SHUTTER Button
While pressing and holding CTL Button, pressing this button
shuts off the light completely.
10. CTL Button
Press the CTL Button together with the FOCUS (+/-) Button,
ZOOM (+/-) Button, LENS SHIFT
GHFE
and SHUTTER But-
ton.
The FOCUS (+/-), ZOOM (+/-), LENS SHIFT
GHFE
and
SHUTTER Buttons do not function when pressed alone.
11. POWER Button (ON / STAND BY)( )
Use this button to turn the power on and off when the main
power is supplied and the Projector is in standby mode.
NOTE: To turn on or off the Projector, press and hold this button for a minimum
of 1 second.
12. POWER Indicator
When this indicator is green, the Projector is on; when this
indicator is orange, it is in standby mode.
13. STATUS Indicator
This indicates the status of the Projector during standby.
The indicator will be lit in green at time of normal operation.
When there is a fault, the indicator will be a flashing or steadily
lit red.
Please check the display information of the LCD screen when
there is a fault.
14. BACK LIGHT Switch
Use this switch to turn on the back light of the LCD screen.
15. LCD CONTRAST Adjustment Dial
Use this dial to adjust the contrast of the LCD screen.
1 2 3 4 5 6
15 14 13 12 11
9 10
8 7