Digital Projection HIGHlite 12000Dsx+, User Manual

Page: 47 / 90

E-47
6. Using On-Screen Menu
NOTE: The shaded item indicates the default setting.
3D Reform
Screen
Ref. Lens Memory
Edge Blending
Lamp Mode
Cornerstone 8 direction / close
Keystone decrease
←→
increase
(When MM-WARP (optional) is inserted, horizontal / vertical)
Screen Type 1.25:1(5:4) / 1.33:1(4:3) / 1.78:1(16:9) / 1.85:1 / 2.35:1
Position -64 to 64
Set Reference Point / Use Reference Point / Return to Factory Default
On / Off
Gamma 1.0 to 3.0
Input Resolution Horizontal / Vertical
Input Position Horizontal / Vertical
Adjust 65%~100% / Auto Off / On
All Data (Including Entry List) / Current Signal
Menu
Setup
Language English / Deutsch / Français / Italiano / Español / Svenska /
Menu Mode Basic / Custom Menu / Advanced Menu / Service Menu
Custom Menu Edit
Menu Display Time Manual / Auto 5 sec / Auto 15 sec / Auto 45 sec
Date Format MM/DD/YYYY / MM/DD/YYYY ddd / DD/MM/YYYY /
DD/MM/YYYY ddd / YYYY/MM/DD / YYYY/MM/DD ddd /
Month DD, YYYY / Month DD, YYYY ddd
Date, Time Preset Date (MM/DD/YYYY (ddd) ) / Time (HH:MM)
Display Select Date / Time / Input Terminal / Source Name / Projector ID / Message
Menu Colour Colour / Monochrome
Orientation Desktop Front / Ceiling Rear / Desktop Rear / Ceiling Front
Background Blue / Black / Logo
Sync Termination (RGB) Hi-Z / 75 [
Ω
]
Signal Select RGB (RGB/Component / RGB / Component)
Video (Auto/NTSC3.58/NTSC4.43/PAL/PAL-M/PAL-N/PAL60/SECAM)
S-Video (Auto/NTSC3.58/NTSC4.43/PAL/PAL-M/PAL-N/PAL60/SECAM)
Auto Adjust On / Off
Auto Start On / Off
Power Off Confirmation On / Off
WARP Correction On / Off (When optional MM-WARP is used, it can choose.)
Last Memory On / Off
Lens shutter on during On / Off
signal switching
3D Sequence Set Select On / Off
Communication Speed 4800 / 9600 / 19200 / 38400
Projector ID Enable (1 to 64) / Disable
Default Source Select Last / Auto / Select
Select: Slot1-1(Video) / Slot1-2(S-Video) /
Slot1-3(Component) / Slot2-1(RGB) /
Slot3-1(None) / Slot4-1(None)
* When the interface boards are installed at the factory.
Control Panel Key Lock Enable / Disable
Page 1
Page 2
Page 3
Page 1
Page 2
Page 3
Page 4
Advanced Menu
Source Select
Adjust (Source)
Ref. Adjust
Factory Default
Projector Options
Tools
Help
Test Pattern