Digital Projection HIGHlite 12000Dsx+, User Manual

Page: 15 / 90

E-15
1. Introduction
Input Terminals
(3) (2) (1)
1. SLOT 1 (MM-VIDEO)
MM-VIDEO interface board is standard equipment.
2. SLOT 2 (MM-RGB)
MM-RGB interface board is standard equipment.
(1) CVBS Input Connector (BNC Type)
Use a 75
Ω
coaxial cable and connect it to the Composite
Video output connector of a DVD player, or to other equip-
ment.
(2) S-VIDEO Input Connectors (2 BNC Type)
Use a 75
Ω
coaxial cable (2-conductor type) and connect it to
the S-Video output connector of a DVD player, or to other equip-
ment.
(3) COMPONENT Input Connectors (3 BNC Type)
Use a 75
Ω
coaxial cable (3-conductor type) and connect it to
the Component output connector of a DVD player, or to other
equipment. Standard definition only (525/60i, 625/50i).
(4) ACT Indicator
Steady green light ..... Shows that this board is selected.
(1) RGB Input Connectors (5 BNC Type)
Use a 75
Ω
coaxial cable (5-conductor type) and connect it to
the display output connector of a personal computer, the colour
difference output connector of a Analog HDTV player, or to
other equipment.
When cable is connected to this port, ferrite core, which at-
tached to this equipment, is assembled to the both sides of
cable.
(2) Audio Input Jacks (RCA-Phono)
These Jacks have no function with the Switcher.
(3) ACT Indicator
Steady green light ..... Shows that this board is selected.
3. SLOT 3
Use to extend the input terminal. See page E-25.
4. SLOT 4
Use to extend the input terminal. See page E-25.
(1) (4) (2) (3)
NOTE: MM-VIDEO interface board and MM-RGB interface board are also available as an option.
2
1
4
3