Digital Projection HIGHlite 12000Dsx+, User Manual

Page: 19 / 90

E-19
1. Introduction
Remote Control Precautions
• The remote control system may not function when direct sunlight or
strong illumination strikes the remote control sensor of the main unit, or
when there is an obstacle in the path.
• When remote control buttons are pressed and held, Projector’s func-
tion keys may not operate.
• Do not subject to strong shock.
• Do not allow water or other liquid to splash on the remote control. If the
remote control gets wet, wipe it dry immediately.
• Avoid exposure to heat and steam.
• Remove the batteries from the remote control when the remote control
is not going to be used for a long period.
Remote Control Battery Installation
Installing the Remote Control Batteries
When it comes time to replace the batteries, two "AA" type will
be required.
1. Press and open the cover.
2. Align and insert the batteries according to the (+) and (-) indications
inside the case.
3. Replace the cover.
Operating Range for Wireless Remote Control
The infrared signal operates by line-of-sight up to a distance of
approximately 7m (20 feet) and a 60 degree angle of the remote
sensor.
The Projector will not function if there are objects between the
remote sensor and the remote control or if strong light falls on
the remote sensor. Weak batteries will also prevent the Projector
from operating properly.
NOTE: You cannot operate the Projector using the remote control if:
• The remote control ID is not set to “None”.
• The remote control ID is not the same as the Projector ID.
See page E-61 for setting remote control ID and Projector ID.
30 ˚
30
˚
7m
Remote sensor on the
Projector cabinet
Remote contorol
30 ˚
30
˚
7m
Remote control
30 ˚
30 ˚
7m
Remote control
Remote sensor on the
Projector cabinet
30
˚
30 ˚
Remote control
7m