Revison: 1.0
Date: 12 /01/2010
Tel: 800-677-5264 | Fax: 888-526-4329
Installation
Page 1 of 6
R. Lang Company
Tel 800-677-5264 | Fax 888-526-4329
Tel 800-677-5264 | Fax 888-526-4329
R. Lang Company
R6500 Series
Installation Instructions
(For Surface Mount Doors)
IMPORTANT:
REVIEW ALL INSTRUCTIONS
THOROUGHLY
BEFORE STARTING STEP 1
TOOLS REQUIRED:
Tape Measure
•
Standard Screwdriver
•
Phillips Head Screwdriver
•
Drill Motor
•
1/8” Drill Bit
•
3/16” Drill Bit
•
Hack or Chop Saw
•
Framing Square
•
Level
•
Step 1
PARTS INCLUDED:
Head Track
#R6046
Sill Track
#R6041
Closer
#R8021
Strike
#D2160
Flat Head Screws
#6 x 3/4”
Pan Head Screws
#4-40 x 1/2”
#8 x 1”
Fabricate / Verify Part Lengths Required
Note:
Assembled Roll-
•
Away
®
screens have already been cut to size. Verify cut size below and proceed to Step 2
Closer (#R8021)
Opening Height minus 1-1/8”
Track (#R6041 & #R6046)
Opening Width minus 3-1/16 ”
Hinge/Housing assembly opening height 1-1/8”.
KD “Kit” Roll-
•
Away
®
screens. Please refer to Page 1 of the
Fabrication Instructions
.
#4-40
Lock Nut
Partially
Assembled Unit
