Service Procedures
Service Procedures
Digital PRIORIS XL Server
Digital PRIORIS XL Server
66
66
MCS Logistics Engineering - Nijmegen
MCS Logistics Engineering - Nijmegen
P
R
I
O
R
I
S
X
L
Connecting Procedures
Connecting Diskette and IDE Devices
To connect diskette and IDE devices, perform the following:
1) Connect supplied ribbon cable to appropriate device as shown. Make sure cable is connected with
correct orientation. Most cables and sockets are keyed so they cannot be connected backwards. If
the cable or device is not keyed, you must connect pin 1 of cable to pin 1 of device's socket.
2) Pin 1 of cable is on edge with colored stripe. Pin 1 of device's socket should be marked with an arrow
at one end of socket. If necessary, refer to the device's documentation for pin 1 orientation.
Legend
Component
A
Power supply
B
Power connections
C
Diskette drive connection
D
IDE drive connection
E
Diskette drive
F
Hard disk drive
G
Optional storage devices
3) Connect appropriate power cable to device.
4) Replace and lock side panel.
5) Connect external devices and restore power.
6) Run SCU to configure server.
DEC00249
D
C
D
B
A
B
C
E
F
B
G
Figure 3 - 29 Diskette/IDE Drive Data Cable Connections
