Utilities & Configuration
Utilities & Configuration
Digital PRIORIS XL Server
Digital PRIORIS XL Server
22
22
MCS Logistics Engineering - Nijmegen
MCS Logistics Engineering - Nijmegen
P
R
I
O
R
I
S
X
L
The SCU automatically detects any EISA expansion boards installed on the server and configures the
server accordingly. The SCU does not automatically detect ISA expansion boards.
Step 3: View or Edit Details
This menu item allows to examine and change the setting of each function and the resource allocated for
those functions. When editing a function or resource in this step, you might have to change the switch or
jumper setting.
Step 4: Examine Required Switches
This menu item allows to view settings (switches and jumpers) that need to be manually set and software
drivers that need to be installed. These recommendations must be followed exactly, otherwise the server
will not work properly.
Step 5: Save and Exit
This menu item allows to exit the SCU program with or without saving the configuration settings.
Adding ISA Boards
Perform the following steps to add ISA boards to the server configuration:
1) Select "
Step 2: Adding and Removing Boards
", and update the list of boards and options to include
any ISA boards you are going to install in the server.
2) Select "
Step 4: Examine Required Switches
", to check the required switch and jumper settings of the
ISA boards.
3) Select "
Step 5: Save and Exit
," to save the configuration and exit the SCU.
4) Turn off the server and install the ISA boards.
CAUTION
Do not attempt to physically install boards while the server is turned on.
SCU and Setup Options
The following Tables list the options available in the BIOS Setup utility and in the SCU (View or Edit
details). Following this table are detailed descriptions of the options that need further explanation.
Use the keyboard function keys to help to select options, change values, and display help information.
NOTE
The ROM BIOS Setup utility, SETUP.EXE, and the SCU contain the same options as
those listed in the following Table. Digital recommends to use the SCU to configure
the server each time you add hardware, remove hardware, or change server settings.
Also, the language field in SETUP.EXE contains all the languages listed as possible
settings. The BIOS Setup utility does not. The BIOS Setup utility has English only.
Use the CD-ROM startup diskette to run UPGRADE.EXE to update the server’s BIOS
to one of the following languages: French, German, Spanish, or Italian.
