manualshive.com logo in svg

DigiDesign D-Control, Manual

Share
Download
DigiDesign D-Control Manual Download Page 89

Chapter 7: Plug-in Controls

81

Dynamics Channel Select Controls

Dynamics Displays

The LED displays in the Dynamics section show the name of 
the focused plug-in by default. When any rotary encoder is 
touched, these displays show the corresponding parameter 
name and value. 

Channel Select Switches

Multichannel Plug-ins

When you are working with a multichannel plug-in, all chan-
nels are controlled in tandem and the Channel Select switches 
have no effect. 

Multi-Mono Plug-ins

When you are working with a multi-mono plug-in, the con-
trols for the channels are usually linked and edited together.

However, you can edit plug-in settings for individual channels 
of a multi-mono plug-in by using the Channel Select switches 
to unlink all of the channels, or to link specific channels.

There are Channel Select switches for the following channels: 

• L  (Left)

• Lc (Left Center)

• C  (Center)

• Rc (Right Center)

• R  (Right)

• Ls  (Left  Surround)

• Cs  (Center  Surround)

• Rs (Right Surround)

• LFE

These choices support all possible channel configurations in 
Pro Tools. A maximum of eight channels (7.1 surround) may 
be in use at any time.

Master Link Switch

Multichannel Plug-ins

When you are working with a multichannel plug-in, all chan-
nels are controlled in tandem, and the Master Link switch has 
no effect.

Multi-Mono Plug-ins

When you are working with a multi-mono plug-in, the Master 
Link switch toggles the Master Link button in the plug-in win-
dow, which links or unlinks all channels of the plug-in. When 
the Master Link button is enabled, the Link switch is lit.

Select/Link/Bypass Mode Switch

The Select/Link/Bypass Mode switch determines the function 
of the Channel Select switches with multi-mono plug-ins. 

Select Mode 

In this mode, the Channel Select switches deter-

mine which channel of a multi-mono plug-in is the focus of 
the plug-in controls. When a channel is selected, its switch is 
lit. If any channels are linked, their switches follow linked be-
havior.

In Select mode, if the D-Control Channel Window Display 
preference is set to Yes, the Channel Select switches also 
change the channel display in the plug-in window.

Bypass Mode 

In this mode, the Channel Select switches deter-

mine which channels of a multi-mono plug-in are bypassed. 
When a channel is bypassed, its switch is lit. If any channels 
are linked, their switches follow linked behavior.

Link Mode 

In this mode, the Channel Select switches deter-

mine which individual channels of a multi-mono plug-in are 
linked together. Linked channels are indicated by switches 
that are lit.

Channel Select controls in the Dynamics section

Dynamics displays

Master Link switch

Bypass indicator

Select/Link/Bypass Mode switch

Channel Select switches

Summary of Contents for D-Control

























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands