manualshive.com logo in svg

DigiDesign D-Control, Manual

Share
Download
DigiDesign D-Control Manual Download Page 109

Chapter 9: Management and Soft Key Sections

101

Chapter 9: Management and Soft Key Sections

Window Management Section

The Window Management section includes controls for opening and closing Pro Tools windows on-screen. When a window is 
open, its corresponding switch is lit. Where applicable, you can hold Alt (Windows) or Option (Mac) when pressing a switch to 
maximize a window, and hold Control (Windows) or Command (Mac) when pressing a switch to minimize a window.

MIDI Event Window Switch

The MIDI Event Window switch opens and closes the MIDI 
Event window or brings it to the front. 

MIDI Operations Window Switch

The MIDI Operations Window switch opens and closes the 
MIDI Operations window.

Beat Detective Window Switch

The Beat Detective Window switch opens and closes the Beat 
Detective window.

Workspace Browser Switch

The Workspace Browser switch opens and closes the DigiBase 
Workspace Browser. Hold Alt (Windows) or Option (Mac) and 
press this switch to close all DigiBase windows.

Big Counter Switch

The Big Counter switch opens and closes the Big Counter win-
dow. 

Mic Pre Window Switch

The Mic Pre Window switch opens and closes the Mic Pre win-
dow for the focused track.

Memory Locations Window Switch

The Memory Locations Window switch opens and closes the 
Memory Locations window.

Transport Window Switch

The Transport Window switch opens and closes the Transport 
window. Hold the following keys and press this switch to 
show/hide Transport controls: 

• Alt (Windows) or Option (Mac): MIDI controls and 

counters

• Control (Windows) or Command (Mac): MIDI controls 

only

• Start (Windows) or Control (Mac): counters only

Pan Window Switch

The Pan Window switch opens and closes the Pan window for 
the focused track. Hold Alt (Windows) or Option (Mac) to 
close all Pan windows.

D-Control Window Management section

MIDI Operations window

Transport window

Big Counter window

Edit window

Mic Pre window

Pan window

Plug-in window

Beat Detective window

MIDI Event window

Workspace Browser window

Memory Locations window

Mix window

Summary of Contents for D-Control

























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands