DigiDesign D-Control, Manual

Page: 173 / 184

Appendix B: Audio Connections and Pinouts 165
Appendix B: Audio Connections and Pinouts
All external D-Control audio connections are made to the back panel of the XMON interface, shown below. All audio connectors
are standard female DB-25 connectors. The connector for communication with D-Control is a 15-pin female connector.
25-Pin Female Connector Pinouts
All XMON DB-25 connector pinouts conform to the pin num-
bering scheme shown below.
Cue Inputs
Main Inputs
Known Issue with XMON REV A, B, C, and D
With XMON REV
A–D, if you have any need to mix signals from Cue Outputs 1,
2, or 3 with other signals from Pro Tools or the XMON, swap
the Hot (+) and Cold (–) connections for
either the Cue Inputs
or the Cue Outputs.
Known Issue with XMON REV E
With XMON REV E, if you
have any need to mix signals from Cue Outputs 1, 2, or 3 with
other signals from Pro Tools or the XMON, swap the Hot (+)
and Cold (–) connections for
both the Cue Inputs and the Cue
Outputs.
XMON back panel connectors
Cue Inputs
Cue Outputs
Main Inputs Surround Inputs Stereo Inputs
Main Outputs Alt Outputs Talkback/Listenback/Utility D-Control connector
DB-25 Connector (user view)
Cue Inputs
Signal Name Hot (+) Cold (–) Ground (shield)
Cue Input 1 (Left) 24 12 25
Cue Input 1 (Right) 10 23 11
Cue Input 2 (Left) 21 9 22
Cue Input 2 (Right) 7 20 8
Cue Input 3 (Left) 18 6 19
Cue Input 3 (Right) 4 17 5
[Not Connected] 15 3 16
[Not Connected] 1 14 2
GND 13
SHIELD GND connector housing
1 13
14 25
Main Inputs
Signal Name Hot (+) Cold (–) Ground (shield)
Main Input 1 (L) 24 12 25
Main Input 2 (Lc) 10 23 11
Main Input 3 (C) 21 9 22
Main Input 4 (Rc) 7 20 8
Main Input 5 (R) 18 6 19
Main Input 6 (Ls) 4 17 5
Main Input 7 (Rs) 15 3 16
Main Input 8 (LFE) 1 14 2
GND 13
SHIELD GND connector housing