DigiDesign 003 Family, Setup Manual

Page: 64 / 191

003 Family Setup Guide 54
Monitor Section
The Monitor section provides the following
control room monitoring features:
Alternate Input Routing Controls
Aux In to 7/8 Switch
This switch routes the Aux
In input pair to Inputs 7 and 8 of Pro Tools, and
does not send it to the Main Monitor Outputs
unless this routing is set up in Pro Tools, or the
Aux In (to Monitor) switch is engaged. This lets
you route an alternate input signal (such as a CD
player) directly into Pro Tools without the need
to repatch any cables.
When Aux In to 7/8 is enabled (lit), Analog In-
puts 7–8 are disabled.
3/4-HP2 Switch
This switch sets the Headphone
2 Output to mirror Output pair 3–4.
Aux In (to Monitor) Switch
This switch routes
the Aux In input pair directly to the Main Mon-
itor and Headphone Outputs.
If you press the Aux In (to Monitor) switch in
conjunction with the Aux In to 7/8 switch, you
will hear the pre-fader input of the Aux In in the
Main Monitor outputs, and can record that in-
put into Pro Tools from Inputs 7/8. Addition-
ally, if you send the output of any track with in-
puts 7/8 back to the Main Monitor outputs, this
can result in a doubled signal.
Alt CR (Control Room) Switch
This switch mutes
the Main Monitor output and routes the signal
to the Alt Monitor output.
Mono Switch This switch temporarily combines
Output 1–2 in the Main and Alt Monitor Out-
puts and the Headphone Outputs. This is help-
ful for checking the phase relationships of stereo
material.
Monitor and Headphone Level Controls
Monitor Level Control
These knobs control the
volume of the Main and Alt Monitor Outputs.
These outputs mirror Analog Outputs1–2, which
correspond to outputs 1–2 in Pro Tools.
Headphone 1 and 2 Level Controls
These knobs
control the volume of the independent Head-
phone Outputs. The Headphone Outputs nor-
mally mirror outputs 1–2 in Pro Tools, and are
independent of the Monitor Outputs.
Headphone 2 mirrors output pair 3–4 when the
3/4-HP2 switch is enabled (lit). Both head-
phones include Aux In signal when Aux In (to
monitor) is enabled.
Headphone output is not affected by the status
of the Monitor Mute switch, but does follow sta-
tus of the Mono switch.
Monitor Mute Switch
This switch mutes the
Main and Alt Monitor Outputs only, and has no
effect on the Headphone Outputs. Monitor
Mute is automatically engaged when you power
up the unit.
Headphone Jacks
Headphone Output 1 and 2 jacks accept stan-
dard 1/4-inch stereo headphone connectors.
The jacks are located on the front of the 003.
Monitor and headphone controls
3/4-HP2 switch
Aux In 7/8 switch
Input Level control
Headphone 1 and 2 Level control
Aux In switch Mono switch
Alt CR switch
Monitor Mute switch