manualshive.com logo in svg

DigiDesign 003 Family, Setup Manual

Share
Download
DigiDesign 003 Family Setup Manual Download Page 171

Appendix D: Hard Drive Configuration and Maintenance

161

Defragmenting Windows Audio Drives

To defragment an audio drive (Windows Vista):

1  

Choose 

Start

 > 

Control Panel

.

2  

Click 

System and Maintenance

.

3  

Click 

Performance Information and Tools

.

4  

Click 

Advanced Tools

.

5  

Click 

Open Disk Defragmenter

.

6  

In the Disk Defragmenter window, click the 

Defragment Now

 button.

To defragment an audio drive (Windows XP):

1  

Right-click 

My Computer

 and choose 

Manage

.

2  

Under Storage, choose 

Disk Defragmenter

.

3  

In the Disk Defragmenter window, choose the 

drive you want to defragment

4  

Click the 

Defragment

 button and follow the 

on-screen instructions.

When defragmenting is complete, close the 
Computer Management window.

Using Mac Drives on Windows 
Systems

Pro Tools for Windows lets you record and play 
back sessions directly from a Mac-formatted 
(HFS+) drive connected to a Windows system. 
This functionality requires that all Mac session 
and audio files be stored on Mac-formatted 
drives.

During Pro Tools installation, make sure to se-
lect the Mac HFS+ Disk Support option. This op-
tion lets your Pro Tools system read, write, 
record, and play back using Mac-formatted 
HFS+ disks.

Formatting and Maintaining HFS+ 
Drives

To format and partition any drives as HFS+, con-
nect the drives to a Mac computer and use the 
Apple OS X Disk Utility. 

The Defragment Now command defrag-
ments all your hard drives. This can take a 
lot of time, especially on systems with mul-
tiple drives. 

Advanced users can use the command line 
tool Defrag.exe to defragment individual 
drives. See your Windows Vista documen-
tation for more information.

For information on using the Mac HFS+ 
Disk Support option, see the HFS+ Disk Sup-
port Option Guide.

For information on sharing sessions be-
tween Mac and Windows systems, see the 
Pro Tools Reference Guide (Help > 
Pro Tools Reference Guide).

Summary of Contents for 003 Family
































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands