DigiDesign 003 Family Setup Manual Download Page 154

Page: 154 / 191

003 Family Setup Guide

144

Exiting Utility Mode

To exit Utility mode:

If a test is running, press ESC or Display Mode

to exit the test.

Press the flashing Utility mode switch.

Viewing Firmware Version
Data

This Utility function lets you check the current
firmware version and other statistics useful
when upgrading, or when contacting technical
support.

To display firmware version data:

Enter Utility mode. If the Utility switch is not

enabled (flashing), press it.

Select Version by pressing the flashing EQ

switch.

The LCD shows version information about vari-
ous components of the unit.

To exit and return to the previous Utility

mode display, press the flashing Display Mode
switch.

LCD Display Test

Use this test to assess the performance of the
LCD.

To test the LCD:

Enter Utility mode. If the Utility switch is not

enabled (flashing), press it.

Select the Test menu by pressing the flashing

Insert switch.

The LCD shows the first page of Utility tests.

Select the LCD test by pressing the flashing

Dynamics switch.

The 003 automatically scrolls all of its character
sets across the LCD display.

To stop scrolling and quickly tell if any area of

the display is damaged, press and hold any
switch except for the Display Mode switch.

Do one of the following:

• To return to the previous Utility page, press

the flashing Display Mode switch.

– or –

• To exit the test at anytime, press the flash-

ing ESC switch or Display Mode switch.

LED Tests

Use this test to display all LEDs simultaneously
or cycle through the LEDs.

To test LEDs:

Enter Utility mode. If the Utility switch is not

enabled (flashing), press it.

Select the Test menu by pressing the flashing

Insert switch.

The LCD shows the first page of Utility tests.

Select the LED menu by pressing the flashing

Insert switch.

Do one of the following

• To display all LEDs, press the flashing Dy-

namics switch.

– or –

• To cycle through all the LEDs, press the

flashing Insert switch.

To exit the test at anytime, press any switch.

Summary of Contents for 003 Family
































































































































































































Search results

Summary of Contents for 003 Family

Reviews:

Brands by name

Popular brands

DigiDesign 003 Family, Setup Manual

Search results

Summary of Contents for 003 Family

Reviews:

Brands by name

Popular brands