manualshive.com logo in svg

DigiDesign 003 Family, Setup Manual

Share
Download
DigiDesign 003 Family Setup Manual Download Page 153

:

143

appendix a

Utility Mode (003 Only)

003 is in this mode when the Utility switch is 
enabled (flashing). In Utility mode, you can run 
pre-programmed diagnostic tests of the 003 
unit. The Utility switch is unavailable in 
Pro Tools mode.

Utility functions include the following:

• Software and firmware version display

• Tests for the LCD display, LEDs, switches, 

rotary encoders, faders, MIDI, and audio.

• Return MIDI Maps to factory default set-

tings. See 

Chapter 12, “Using MIDI Mode 

with 003.”

Accessing Utility Mode

To enter Utility mode:

1  

If Pro Tools is running, choose 

Pro Tools > Quit

 

(Mac) or 

File > Exit

 (Windows).

2  

Press the Utility switch.

The Utility switch flashes when it is enabled.

The LCD shows the top level Utility functions 
across the lower row: Version and Test. The cor-
responding Channel View switches flash for 
each available Utility option.

Navigating Utility Mode

When running a Utility mode test, you can re-
turn to the previous Utility page or exit the test 
at anytime.

To return to the previous Utility page:

Press the flashing Display Mode switch.

To exit a test:

Press the flashing ESC switch or Display Mode 

switch.

Utility mode is not available in Pro Tools 
mode. Pro Tools must be closed to enable 
Utility mode.

Summary of Contents for 003 Family
































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands