manualshive.com logo in svg

DigiDesign 003 Family, Setup Manual

Share
Download
DigiDesign 003 Family Setup Manual Download Page 128

003 Family Setup Guide

118

Mapping Controls

003 faders, rotary encoders, and switches can be 
assigned, or 

mapped

, to MIDI continuous con-

trollers (CC) and MIDI channels. As many as 
eight presets (A1–4 and B1–4) can store unique, 
custom MIDI maps, each with two pages of 
unique MIDI assignments for each control.

Assignable Controls in MIDI Mode

Faders

Each fader can be mapped to No Assign or any 
MIDI continuous controller (CC) and MIDI 
channel. Minimum and maximum MIDI values, 
as well as custom names, can be specified for 
each fader.

Rotary Encoders

Each rotary encoder can be mapped to No As-
sign or any MIDI continuous controller (CC) 
and MIDI channel. Minimum and maximum 
MIDI values, as well as custom names, can be 
specified for each rotary encoder.

Switches

Up to 45 switches and the footswitch on 003 can 
be mapped to No Assign or any MIDI continu-
ous controller (CC) and MIDI channel. Switches 
can also be set to MMC transport control mes-
sages (Rewind, Fast Forward, Stop, Play, and 
Record). Custom names can be specified for 
each switch. 

Switches can be set to Momentary or Latch 
mode (see “Momentary or Latch Mode” on 
page 120).

The following switches are assignable controls:

• Channel Mute switches

• Channel Solo switches

• Channel View switches

Channel View switches are also used to navi-
gate, select, and save MIDI mode presets.

• Console View switches

• Record Arm switch

• Arrow keys

• Transport controls

Transport controls are mapped to standard MIDI 
Machine Control (MMC) messages (RW, FF, ST, 
PL, and RC) by default, but can be re-assigned to 
any CC number.

• Footswitch

Figure 1.  Channel View switches

Console View selectors

Arrow keys

Transport controls

Summary of Contents for 003 Family
































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands