manualshive.com logo in svg

DigiDesign 003 Family, Setup Manual

Share
Download
DigiDesign 003 Family Setup Manual Download Page 20

003 Family Setup Guide

10

To connect a FireWire hard drive, do one of the 
following:

If your computer has more than one FireWire 

port, connect the FireWire hard drive to one 
FireWire port on the computer, and connect 
your 003 family interface to another FireWire 
port on the computer. 

– or –

If your computer has only one FireWire port, 

connect the FireWire hard drive directly to your 
computer and then connect your 003 family in-
terface to an available FireWire port on the 
drive.

Connecting Other FireWire 
Devices to 003 Family Interfaces

The second FireWire port on your 003 family in-
terface is available for daisy-chaining FireWire 
devices such as digital cameras or digital video 
recorders. Even when it is powered off, 
003 family interfaces supply power from the 
computer through its FireWire ports, letting you 
recharge batteries in connected FireWire de-
vices.

Uninstalling Pro Tools

If you need to uninstall Pro Tools software from 
your computer, use the Uninstaller application. 

To uninstall Pro Tools from your computer:

1  

Make sure you are logged in as an Administra-

tor for the account where Pro Tools is installed. 

2  

Go to Applications/Digidesign/Pro Tools/

Pro Tools Utilities and double-click 

Uninstall Pro Tools

.

3  

Click 

Continue

 to proceed with the uninstall.

4  

Choose the type of uninstall you want to per-

form:

Safe Uninstall 

Leaves certain plug-ins and sys-

tem files needed for compatibility with some 
Avid products. Use 

Safe Uninstall

 if you are using 

an Avid application or preparing to update to a 
.cs release.

Clean Uninstall 

Removes all Pro Tools files, in-

cluding system files, Digidesign plug-ins, and 
MIDI patch names. Use 

Clean Uninstall

 whenever 

you are preparing to upgrade, or to troubleshoot 
from a clean system.

5  

Click 

Uninstall

. 

6  

Enter your Administrator password and click 

OK

. 

7  

Click 

Finish

 to close the Installer window.

Connecting your 003 family interface to your 
computer through a FireWire hard drive does 
not support maximum track count. To 
achieve the maximum track count, purchase 
a PCI/PCMCIA/ExpressCard to increase the 
number of FireWire ports on your computer. 

For information on supported PCI/PCM-
CIA/ExpressCard FireWire options, visit the 
Digidesign website (www.digidesign.com).

For details on Administrator privileges in 
Mac OS X, see your Apple OS X documen-
tation. 

Summary of Contents for 003 Family
































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands