manualshive.com logo in svg

DigiDesign 003 Family, Setup Manual

Share
Download
DigiDesign 003 Family Setup Manual Download Page 58

003 Family Setup Guide

48

Transport and Navigation Controls

The 003 provides a standard set of Transport controls that mirror Pro  Tools on-screen controls (when 
in Pro Tools mode) and conform to standard MMC commands for controlling other devices (in MIDI 
mode). Navigation keys and shortcut switches support Pro Tools zooming, banking, and navigation 
features.

Transport Controls

These controls correspond to transport func-
tions in Pro Tools. 

RTZ 

(Return to Zero) Sets the playback cursor to 

the beginning of the session.

REW 

(Rewind) Rewinds through the session 

from the current cursor position.

FFW 

(Fast Forward) Fast-forwards through the 

session from the current cursor position.

STOP 

Stops playback or recording.

Play 

Begins playback from the current cursor po-

sition.

Record 

Arms Pro Tools for recording. Clicking 

Play then initiates recording on record-enabled 
tracks only.

003 transport and navigation controls

Transport controls

Jog/Shuttle wheel

Windows Show/Hide switches

Arrow keys

Fader Display switches

Transport mode switches

Mem Loc (Memory Location) switch

MIDI Map switches Miscellaneous switches

Summary of Contents for 003 Family
































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands