003 Family Setup Guide
46
Insert/Send Position Switches
These switches determine which of the five
available insert positions (marked A–E in
Pro Tools) or ten available send positions
(marked A–J in Pro Tools) are displayed in Con-
sole View.
There are three Console Views, based on their
corresponding switch name:
Pan Switch
When enabled (lit), 003 is in Pan
View. This is the default View when you first
open a Pro Tools session.
In this view, rotary encoders adjust channel pan
positions, and faders adjust track volume. The
bottom row of the LCD shows the track names,
and temporarily shows the channel pan posi-
tions when the encoder is moved, or volume in-
formation when the fader is moved. The top row
of the LCD shows the pan mode (left or right)
and Main Counter.
Send Switch
When enabled (lit), 003 is in Send
View. In this view, rotary encoders adjust Send
level and the faders adjust track volume. The
bottom row of the LCD shows the names of cur-
rently assigned sends across all channel strips
for a given send position (Sends A–J in
Pro Tools). The top row of the LCD shows the
send position and Main Counter.
Insert Switch
When enabled (lit), 003 is in Insert
View. In this view, the bottom row of the LCD
shows the names of currently assigned inserts
(hardware inserts or plug-ins) across all channel
strips for a given insert position (Inserts A–E in
Pro Tools). The top row of the LCD shows the
insert position and Main Counter.
Channel View Section Switches
The first four Channel View switches determine
the type of information displayed for a selected
track. The first two switches focus on particular
types of plug-ins (EQ and Dynamics), while the
second two address all types of inserts and
sends.
The Channel View section also includes Page
Left, Page Right, Master Bypass, and ESC
switches.
003 is in Channel View when any of the first
four Channel View Select switches (EQ, Dynam-
ics, Insert, or Pan/Send) is lit in the Channel
View section.
For information on using Console View for
specific Pro Tools workflows, see
Chapter 11, “Pro Tools Mode with 003.”
For information on using Console View for
specific Pro Tools workflows, see
Chapter 11, “Pro Tools Mode with 003.”
Channel View switches
EQ
Dynamics
Insert
Pan/Send/PRE
< Page >
Master ESC
Bypass
Summary of Contents for 003 Family
