manualshive.com logo in svg

DigiDesign 003 Family, Setup Manual

Share
Download
DigiDesign 003 Family Setup Manual Download Page 168

003 Family Setup Guide

158

SCSI Hard Drives

Digidesign recommends qualified SCSI hard 
drives and a qualified SCSI host bus adapter 
(HBA) card or (on Windows systems) a qualified 
built-in SCSI HBA connector on the mother-
board.

For complete information on track count and 
the supported number and configuration of 
SCSI drives, visit the Digidesign website at: 

www.digidesign.com/compatibility

FireWire Hard Drives

Digidesign recommends qualified FireWire 
drives and (on Windows systems) a qualified 
FireWire host adapter.

For complete information on track count and 
the supported number and configuration of 
FireWire drives, visit the Digidesign website at: 

www.digidesign.com/compatibility

IDE/ATA/SATA Hard Drives

A qualified internal IDE/ATA/SATA drive may be 
used as a dedicated audio drive. 

For complete information on track count with 
internal drives, visit the Digidesign website at: 

www.digidesign.com/compatibility

Formatting an Audio Drive

Formatting Mac Audio Drives

For optimum performance, audio drives should 
be formatted as Mac OS Extended (Journaled). 

To format an audio drive: 

1  

Launch the Disk Utility application, located in 

Macintosh HD/Applications/Utilities.

2  

Click the 

Erase

 tab. 

3  

Select the drive you want to initialize in the 

column on the left side of the window. 

4  

Choose the 

Mac OS Extended (Journaled)

 for-

mat. 

5  

Type a name for the new volume. 

6  

If you plan to connect the drive to a Mac  OS 9 

computer, select 

Install Mac OS 9 Drivers

. 

7  

Click 

Erase

.

The drive appears on the Desktop with the new 
volume name.

Disk Utility (Mac OS X)

Do not choose the “Case-Sensitive” format 
option. Pro Tools will not operate properly 
with case-sensitive formatted drives.

Summary of Contents for 003 Family
































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands