Chapter 11: Pro Tools Mode with 003
109
To exit Flip mode (and transfer controls from
faders back to the rotary encoders):
While in Flip mode, press the Flip switch.
Flip Mode Views
There are several types of Flip mode, depending
on the view.
Send Flip Mode
When you are in Console Send
View, the Flip switch moves the send level con-
trols to the channel faders, and the send pan
controls to the rotary encoders. The LCD shows
the selected send (A–E, or F–J) for each channel.
In addition, the Mute switch controls Send
mute, whereas the Solo switch continues to con-
trol the track’s output muting and the Select
switch continues to control Send Pre/Post sta-
tus.
For mono tracks with stereo sends, only the left
pan indicator shows a pan position; the right
pan indicator is inactive.
For stereo tracks with stereo sends, you can con-
trol either the left or right send pan from the ro-
tary encoder.
To assign a stereo send channel to a rotary
encoder:
While in Send Flip mode, press the Meter
switch immediately to the right of the rotary en-
coders and select Left or Right.
Both the LCD and the Meter Mode LEDs indi-
cate whether the left or right pan position is dis-
played. The rotary encoder LEDs show pan posi-
tioning.
Plug-in Flip Mode
When you are in Channel
View (or Console Insert View) and working with
a plug-in insert, the Flip switch moves any
plug-in control assignments from the rotary en-
coders to the faders, allowing you to use the
touch-sensitive faders to edit and automate
plug-in control values. The types of plug-in con-
trols depend on the particular plug-in you are
using.
Pan/Send Flip Mode
When you are in Channel
View and working with the pan and send assign-
ments on a channel, the Flip switch moves the
send level controls to channel faders 3–7, and
the send pan controls to rotary encoders 3–7.
(The first Channel’s LCD display and rotary en-
coder continue to show track pan position for
that track.)
In this mode, the Channel Select switches toggle
pre- and post-fader metering for the correspond-
ing send.
For stereo tracks with stereo sends, you can con-
trol either the left or right send pan from the ro-
tary encoder. See “Send Flip Mode” on page 109.
Banking Channels on 003
To move the display of tracks on 003 forward or
backward eight channels at a time:
1
Press the Bank switch.
2
Press the Left or Right Arrow key.
To move the display of tracks on 003 forward or
backward one channel at a time:
1
Press the Nudge switch.
2
Press the Left or Right Arrow key.
To scroll the display of tracks on 003 forwards
Hold the Nudge switch and rotate the inner
Jog wheel clockwise to scroll tracks to subse-
quent faders.
See “Working in Channel View” on
page 95 for more details on working with
pan controls and sends in Channel View.
Summary of Contents for 003 Family
