manualshive.com logo in svg

DigiDesign 003 Family, Setup Manual

Share
Download
DigiDesign 003 Family Setup Manual Download Page 37

Chapter 4: Configuring Your Pro Tools System

27

Configuring I/O Setup

Using the I/O Setup dialog, you can label 
Pro  Tools  LE input, output, insert, and bus 

signal 

paths

. The I/O Setup dialog provides a graphical 

representation of the inputs, outputs, and signal 
routing of the 003 family interface.

Pro Tools LE has default I/O Setup settings that 
will get you started. Use the I/O Setup dialog 
only if you want to rename the default I/O 
paths.

To rename I/O paths in I/O Setup:

1  

Choose 

Setup > I/O

.

2  

Click the 

Input

, 

Output

, 

Insert

, or 

Bus

 tab to dis-

play the corresponding paths. 

3  

To change the name of a path or subpath, dou-

ble-click directly on the Path Name, type a new 
name for the path, and press Return (Mac) or 
Enter (Windows).

4  

Click 

OK

. 

Configuring MIDI Setup

If you plan to use any MIDI devices with Pro Tools, 
do one of the following:

On Mac, configure your MIDI setup with Au-

dio MIDI Setup. See Appendix B, “Configuring 
AMS (Mac OS X Only)” for details.

– or –

On Windows, configure your MIDI setup with 

MIDI Studio Setup. See Appendix C, “Configur-
ing MIDI Studio Setup (Windows Only)” for de-
tails.

Backing Up Your System 
Configuration

After configuring your system and Pro Tools, 
you should save an image of your system drive 
using a backup utility such as Norton Ghost 
(Windows) or Bombich Carbon Copy Cloner 
(Mac). By doing this, you can quickly restore 
your system configuration and settings if you 
encounter any problems.

I/O Setup dialog, Input tab

See the Pro Tools Reference Guide (or choose 
Help > Pro Tools Reference Guide) for more 
information on renaming I/O paths.

Summary of Contents for 003 Family
































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands