manualshive.com logo in svg

DigiDesign 003 Family, Setup Manual

Share
Download
DigiDesign 003 Family Setup Manual Download Page 62

003 Family Setup Guide

52

Automation Section

This section provides switches for controlling 
how automation data is written and played 
back.

Automation Mode Switches

The Write, Touch, Latch, Read, and Off switches 
are used to set the Pro Tools Automation mode 
for any track. 

When the Meter switch is set to Auto, the Meter 
LEDs for each channel display its Automation 
status.

Automation Switch LEDs

The Write, Touch, Latch, and Read switch LEDs 
individually light when at least one channel has 
the corresponding Automation mode. The Off 
switch LED flashes when no channels are set to 
Write, Touch, or Latch, and at least one chan-
nel’s Automation mode is set to Off.

Multiple LEDs light when there are channels 
with different Automation modes.

Suspend Switch

When enabled (flashing), automation is sus-
pended for all channels.

Modifiers Section

The Modifiers section includes four switches for 
modifying commands in combination with 003 
switches, keyboard shortcuts, and Right-click 
commands in Pro Tools:

Shift (Add) Switch 

This switch lets you extend a 

track selection or add to a group of selected 
items.

Option/Alt (All) Switch 

This switch lets you ap-

ply an action or command to all tracks in a 
Pro Tools session.

Ctrl/Win Switch 

This switch lets you tempo-

rarily disengage a control from grouped behav-
ior. 

Command/Ctrl Switch 

This switch lets you 

fine-adjust controls and automation break-
points.

Automation section

For more information, see “Working with 
Automation” on page 110.

Write switch

Touch switch

Latch switch

Read switch

Off switch

Suspend switch

For more information, see “Working with 
Automation” on page 110.

003 keyboard modifier keys

Option/Alt (All) switch

Shift (Add) switch

Command/Ctrl switch

Ctrl/Win switch

Summary of Contents for 003 Family
































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands