Routing
Virtual Router Redundancy Protocol (VRRP)
IX14 User Guide
739
more often than the default of 15 minutes.
Allowed values are any number of weeks, days, hours, minutes, or seconds, and take
the format
number
{
w|d|h|m|s
}. For example, to set
Interval
to five seconds, enter
5s
.
iv. Click to expand
Test targets
>
Test target
.
v. Configure the test target. For example, to configure SureLink to verify internet
connectivity on the LAN by pinging my.devicecloud.com:
i. For
Test Type
, select
Ping test
.
ii. For
Ping host
, type
my.devicecloud.com
.
11. Click
Apply
to save the configuration and apply the change.
Command line
1. Log into the IX14 command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an
Access selection
menu
. Type
admin
to access the Admin CLI.
2. At the command line, type
config
to enter configuration mode:
> config
(config)>
3. Create a new VRRP instance, or edit an existing one. See
for information about
creating a new VRRP instance.
4. Enable VRRP+:
(config)> network vrrp VRRP_test vrrp_plus enable true
(config)>
5. Add interfaces to monitor. Generally, this will be a cellular or WAN interface.
a. Use the
?
to determine available interfaces:
(config)> network vrrp test interface ?
Interface: The network interface.
