Services
Network Time Protocol
IX14 User Guide
413
d. Click
to add additional NTP servers. If multiple servers are included, servers are
tried in the order listed until one succeeds.
Note
This list is synchronized with the list of servers included with NTP client configuration,
and changes made to one will be reflected in the other. See
for
more information about NTP client configuration.
8. (Optional) Configure the system time zone. The default is
UTC
.
a. Click
System
>
Time
b. Select the
Timezone
for the location of your IX14 device.
9. Click
Apply
to save the configuration and apply the change.
Command line
1. Log into the IX14 command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an
Access selection
menu
. Type
admin
to access the Admin CLI.
2. At the command line, type
config
to enter configuration mode:
> config
(config)>
3. Enable the ntp service:
(config)> service ntp enable true
(config)>
4. (Optional) Add an upstream NTP server that the device will use to synchronize its time to the
appropriate location in the list of NTP servers. The default setting is
time.devicecloud.com
.
n
To delete the default NTP server,
time.devicecloud.com
:
(config)> del service ntp server 0
(config)>
n
To add the NTP server to the beginning of the list, use the index value of
0
to indicate
that it should be added as the first server:
(config)> add service ntp server 0 time.server.com
(config)>
n
To add the NTP server to the end of the list, use the index keyword
end
:
(config)> add service ntp server end time.server.com
(config)>
n
To add the NTP server in another location in the list, use an index value to indicate the
appropriate position. For example:
