Digi IX14 User Manual Download Page 222

Page: 222 / 828

User authentication

LDAP

IX14 User Guide

222

6. For

TLS connection

, select the type of TLS connection used by the server:

Disable TLS

: Uses a non-secure TCP connection on the LDAP standard port, 389.

Enable TLS

: Uses an SSL/TLS encrypted connection on port 636.

Start TLS

: Makes a non-secure TCP connection to the LDAP server on port 389, then

sends a request to upgrade the connection to a secure TLS connection. This is the
preferred method for LDAP.

7. If

Enable TLS

Start TLS

are selected for

TLS connection

Leave

Verify server certificate

at the default setting of enabled to verify the server

certificate with a known Certificate Authority.

Disable

Verify server certificate

if the server is using a self-signed certificate.

8. (Optional) For

Server login

, type a distinguished name (DN) that is used to bind to the LDAP

server and search for users, for example

cn=user,dc=example,dc=com

. Leave this field blank

if the server allows anonymous connections.

9. (Optional) For

Server password

, type the password used to log into the LDAP server. Leave

this field blank if the server allows anonymous connections.

10. For

User search base

, type the distinguished name (DN) on the server to search for users. This

can be the root of the directory tree (for example,

dc=example,dc=com

) or a sub-tree (for

example.

ou=People,dc=example,dc=com

11. For

Login attribute

, enter the user attribute containing the login of the authenticated user. For

example, in the

LDAP user configuration

, the login attribute is

uid

. If this attribute is not set,

the user will be denied access.

12. (Optional) For

Group attribute

, type the name of the user attribute that contains the list of

IX14 authentication groups that the authenticated user has access to. See

LDAP user

configuration

for further information about the group attribute.

13. For

Timeout

, type or select the amount of time in seconds to wait for the LDAP server to

respond. Allowed value is between

and

seconds.

14. Add LDAP to the authentication methods:

a. Click

Authentication

Methods

b. For

Add method

, click



c. Select

LDAP

for the new method from the

Method

drop-down.

Authentication methods are attempted in the order they are listed until the first successful
authentication result is returned. See

Rearrange the position of authentication methods

for

information about rearranging the position of the methods in the list.

15. Click

Apply

to save the configuration and apply the change.

Summary of Contents for IX14





























































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for IX14

Reviews:

Related manuals for IX14

Brands by name

Popular brands

Digi IX14, User Manual

Search results

Summary of Contents for IX14

Reviews:

Related manuals for IX14

Brands by name

Popular brands