Applications
Digidevice module
IX14 User Guide
476
i. Log into the IX14 command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an
Access
selection menu
. Type
admin
to access the Admin CLI.
ii. At the command line, type
config
to enter configuration mode:
> config
(config)>
iii. Add an application entry:
(config)> add system schedule script end
(config system schedule script 0)>
Scheduled scripts are enabled by default. To disable:
(config system schedule script 0)> enable false
(config system schedule script 0)>
iv. Provide a label for the script:
(config system schedule script 0)> label "Show system application"
v. Configure the application to run automatically when the device reboots:
(config system schedule script 0)> when boot
(config system schedule script 0)>
vi. Configure the application to restart if it crashes:
(config system schedule script 0)> exit_action restart
(config system schedule script 0)>
vii. Set the command that will execute the application:
(config system schedule script 0)> commands "python
/etc/config/scripts/showsystem.py"
(config system schedule script 0)>
viii. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
b. Run the showsystem.py application. You can run the application by either rebooting the
device, or by running it from the shell prompt.
n
To reboot the device:
i. From the WebUI:
i. From the main menu, click
System
.
ii. Click
Reboot
.