Initial configuration
Configure system settings
IX14 User Guide
57
4. Configure scheduled tasks:
n
Set the reboot time:
(config)> system schedule reboot_time
time
(config)>
where
time
is the time of the day that the device should reboot, using the format
HH
:
MM
.
n
Schedule maintenance tasks:
l
Configure the time of day that the maintenance window should start, using the
syntax
HH
:
MM
. If the start time is not set, maintenance tasks are not scheduled and
will not be run.
(config system schedule maintenance trigger 0)> time from
HH
:
MM
(config system schedule maintenance trigger 0)>
l
Configure the duration length (the amount of time that the maintenance tasks will
be run). If
0
is used, all scheduled tasks will begin at the start time as defined in the
previous step.
system schedule maintenance length
num
(config)>
where
num
is any whole number between
0
and
24
.
l
Configure the frequency that the maintenance tasks should be run:
system schedule maintenance frequency
value
(config)>
where
value
is either
daily
or
weekly
.
daily
is the default.
l
Configure the device to look for any updated modem firmware during the
maintenance window. If updated firmware is found, it will then be installed. The
device will look for updated firmware both on the local device and over the
network, using either a WAN or cellular connection.
system schedule maintenance modem_fw_update
value
(config)>
where
value
is either
true
or
false
.
yes
or
no
, and
1
or
0
are also allowed.
l
Allow for the configuration to be updated, including by custom scripts, during the
maintenance window:
system schedule maintenance config_check
value
(config)>
where
value
is either
true
or
false
.
yes
or
no
, and
1
or
0
are also allowed.
5. If you want to add custom scripts, see
Schedule system maintenance tasks
for more
information.
6. (Optional) Set the timezone for the location of your IX14 device. The default is
UTC
.
