Interfaces
Wireless Wide Area Networks (WWANs)
IX14 User Guide
107
3. Click
Network
>
Interfaces
.
4. Create the WWAN or select an existing WWAN:
n
To create a new WWAN, for
Add interface
, type a name for the WWAN and click
.
n
To edit an existing WWAN, click to expand the WWAN.
New WWANs are enabled by default. To disable, click
Enable
.
5. For
Interface type
, select
Modem
.
6. The WWAN is enabled by default. Click
Enable
to disable, or to enable if it has been disabled.
7.
Interface type
defaults to
Modem
.
8. For
Zone
, select
External
.
9. For
Device
, select the cellular modem.
10. For
Match SIM by
, select a SIM matching criteria to determine when this WWAN should be
used:
n
If
SIM slot
is selected, for
Match SIM slot
, select which SIM slot must be in active for
this WWAN to be used.
n
If
Carrier
is selected, for
Match SIM carrier
, select which cellular carrier must be in
active for this WWAN to be used.
n
If
PLMN identifier
is selected, for
Match PLMN identifier
, type the PLMN id that must
be in active for this WWAN to be used.
n
If
IMSI
is selected, for
Match IMSI
, type the International Mobile Subscriber Identity
(IMSI) that must be in active for this WWAN to be used.
n
If
ICCID
is selected, for
Match ICCID
, type the unique SIM card ICCID that must be in
active for this WWAN to be used.
11. Type the
PIN
for the SIM. Leave blank if no PIN is required.
