Digi IX14 User Manual Download Page 302

Page: 302 / 828

System administration

Configuration files

IX14 User Guide

302

1. Log into the IX14 WebUI as a user with Admin access.

2. On the main menu, click

System

. Under

Configuration

, click

Configuration Maintenance

The

Configuration Maintenance

windows is displayed.

3. In the

Configuration Restore

section:

a. If a passphrase was used to create the configuration backup, for

Passphrase

(save/restore)

, enter the passphrase.

b. Under

Configuration Restore

, click

Choose File

c. Browse to the system firmware file location on your local computer and select the file.

d. Click

RESTORE

4. Click

CONFIRM

The configuration will be restored and the device will be rebooted.



Command line

1. Log into the IX14 command line as a user with Admin access.

Depending on your device configuration, you may be presented with an

Access selection

menu

. Type

admin

to access the Admin CLI.

2. If the configuration backup is on a remote host, use

scp

to copy the file from the host to your

device:

> scp host

hostname-or-ip

user

username

remote

remote-path

local

local-

path

to local

where:

hostname-or-ip

is the hostname or ip address of the remote host.

username

is the name of the user on the remote host.

remote-path

is the path and filename of the file on the remote host that will be copied

to the IX14 device.

local-path

is the location on the IX14 device where the copied file will be placed.

Summary of Contents for IX14





























































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for IX14

Reviews:

Related manuals for IX14

Brands by name

Popular brands

Digi IX14, User Manual

Search results

Summary of Contents for IX14

Reviews:

Related manuals for IX14

Brands by name

Popular brands