Routing
IP routing
IX14 User Guide
716
b. Set the destination port:
(config network route policy 0)> dst_port
value
(config network route policy 0)>
where
value
is the port number, or the keyword
any
to match any port as the
destination port.
n
upd
: Source and destination ports are matched:
a. Set the source port:
(config network route policy 0)> src_port
value
(config network route policy 0)>
where
value
is the port number, or the keyword
any
to match any port as the
source port.
b. Set the destination port:
(config network route policy 0)> dst_port
value
(config network route policy 0)>
where
value
is the port number, or the keyword
any
to match any port as the
destination port.
n
icmp
: The ICMP protocol is matched. Identify the ICMP type:
(config network route policy 0)> icmp_type
value
(config network route policy 0)>
where
value
is the ICMP type and optional code, or set to
any
to match for any ICMP
type.
9. Set the source address type:
(config network route policy 0)> src type
value
(config network route policy 0)>
where
value
is one of:
n
zone
: Matches the source IP address to the selected firewall zone. Set the zone:
a. Use the
?
to determine available zones:
(config network route policy 0)> src zone ?
Zone: Match the IP address to the specified firewall zone.
Format:
any
dynamic_routes
edge
external
internal
ipsec
loopback
setup
