DIETA MI-MX user manual 5/2019 • Page EN-126
START AND STOP
Press START button to run the program. Even after
starting, you may make changes to any steps that
are being executed or not started.
If the screen has not been touched in 20 seconds,
the display shows ”VITAL SIGNS”. You can go back
to the settings/steps by just touching the screen
anywhere. VITAL SIGNS is the same as with other
programming modes.
The program stops automatically when the last
step time ends - or if it had no time, the set
temperature is reached.The program can be also
stopped with STOP -button
Program end -view is the same as in other
programs. Program can be saved (SAVE-button) or
continued (CONTINUE PROGRAM -button)
NOTE!
CONTINUE PROGRAM -button works as a safeguard
if program is stopped accidentally. If program has
ended, it returns to last step and adds 10 minutes
to the program time.
If program was stopped with the STOP-button, it
will return to the step where STOP was used and
continue from there.