13-18
ID-04 Imager User’s Manual
Default / Reset / Save
Default / Reset / Save
Understanding and controlling your Imager’s active, saved, and default settings is critical
to its successful operation.
Resets
Resets (“
A
” commands) affect only the current settings (active memory) and are not saved
for power-on.
Saved for Power-on
Power-on parameters (“
Z
” commands) are saved to NOVRAM and recalled and loaded
into current parameters when power is cycled to the Imager or the
<Arp>
command is
sent.
Defaults
Defaults are di-soric firmware settings or saved customer settings that can be recalled,
either by software or hardware reset.
Function
Serial
Cmd
di-soric ID (first,
right click in any
menu tree)
a
a. When you right click in a menu tree and select
Default Current Menu Settings
or
Default All di-
soric ID Settings
, it is important to note that only
di-soric ID
settings are defaulted. To save these
defaults to the reader itself, you need to follow up with a
Save to Reader, Send and Save
com-
mand.
EZ Button
Resets
(not saved
for power-on)
Reset <
A
>
Save to Reader,
Send No Save
No
Reset and recall di-soric defaults
<
Ard
>
No
No
Reset and recall power-on parameters
<
Arp
>
No
No
Reset and recall customer default parameters
<
Arc
>
No
No
Saved for Power-on
Save current settings for power-on
<
Z
>
Save to Reader,
Send and Save
No
Save current settings as customer default
parameters for power-on
<
Zc
>
Save to Reader,
Send and Save
Customer Defaults
for Power-On
b
b. Only available in
di-soric ID
if enabled under the
Options
pulldown menu.
No
Recall di-soric default parameters and save
for power-on
<
Zrd
>
No
No
Recall customer default parameters and save
for power-on
<
Zrc
>
No
Press and
hold while
powering on
Imager
Summary of Contents for ID-04
