Di-soric ID-04 User Manual Download Page 294

Page: 294 / 368

12-2

ID-04 Imager User’s Manual

Terminal Window

Terminal Window

To use

di-soric ID

’s

Terminal

, click on the

Terminal

button:

You will see this window:

The

Terminal

screen allows you to send serial commands to the Imager by using Macros,

by copying and pasting, or by typing commands in the

Send

text field.

The

Terminal

screen also displays symbol data or information from the Imager.

You can also right click on the

Terminal

screen to bring up a menu of further options.

Clear

screen

Copy,

paste,

save

Type text here to

find matching text

in the

Terminal

window.

Terminal

screen

Type serial

commands

here.

Macros listed

on this bar

Click on Macros arrow to

Add Macro

Remove Macro

, or

Edit Macro

Click on desired

Macro to run.

Summary of Contents for ID-04

















































































































































































































































































































































































Search results

Summary of Contents for ID-04

Reviews:

Related manuals for ID-04

Brands by name

Popular brands

Di-soric ID-04, User Manual

Search results

Summary of Contents for ID-04

Reviews:

Related manuals for ID-04

Brands by name

Popular brands